Pre-assembled Heating Cable for Ice Dam Prevention kit #LTC Kit
Icoheat LTC Kit is pre-assembled heating cable with plug, 2m cold lead, heating cable. The kit is ideally used for purposes to prevent frozen pipes or Roof & gutter de-icing. With UV-proof thermoplastic jacket (CT), it is for being installed outside of pipe, tank, roof, gutter, downspout.
- Power lead cable: 2M
- Plug available: EU, UK, US plug
- Wattage: 10W 17W
- Voltage: 110-120V,208-277V
- Dimension: 12x6mm (CT) ,12×5.4mm (CF)
- Approvals: -CSA- CE UKCA EAC
- Application: Pipe frozen prevention, Roof & gutter de-icing
- General
- Specification
LTC Self Regulating Heating Cable Kit
LTC Self Regulating Heating Cable Kit is a pre-assembled heating cable with plug, 2m cold lead, heating cable. The kit is ideally used for purposes to prevent frozen pipes or Roof & gutter de-icing. With UV-proof thermoplastic jacket (CT), it is for being installed outside of pipe, tank, roof, gutter, downspout.
LTC Self Regulating Heating Cables is constructed of matrix made of a semiconductor PTC (Positive temperature coefficient) material extruded even between two parallel copper bus wires. It produces heat from the flow of current through PTC material which convert electrical energy into heat as it is resistance heating element. A self-regulating cable automatically varies its output power according to ambient temperature change. It increases its heat output while the ambient temperature is decreasing. Relatively, it reduces its heat output while the ambient temperature is increasing.
Benefits:
- Safe, Multiple overlap is allowed and no overheat accumulation when overlap
- Energy-saving, automatically adjust its output power in response to surrounding temperature
- Easy installation with pre-assembled plug.no extra assemble work on site
- Reliable, low installed & maintenance cost
- Clear, no pollution for environment.
| Cold cable length | 2M or according to clients |
| Plug type | Available for EU, UK, US plug etc |
| Max exposure temp (power off): | 85°C |
| Temperature classification: | T6 |
| Minimum installation temperature: | -40°C |
| Output power: | 10,17,26,33 W/m |
| Work Voltage: | 110-120V,208-277V |
| Tinned copper braid resistance: | Max 0.018Ω/m |
| Min bend radius: | 13mm @20°C / 35mm @-40°C |
| Outer jacket: | CF (fluoropolymer outer jacket) |
| CT (thermoplastic outer jacket) |
| Type | Liner power(w) | Length(m) | Total wattage(w) | Voltage |
| 17LTC2-CT 1m | 17 | 1 | 17 | 230V |
| 17LTC2-CT 2m | 17 | 2 | 34 | 230V |
| 17LTC2-CT 3m | 17 | 3 | 51 | 230V |
| 17LTC2-CT 4m | 17 | 4 | 68 | 230V |
| 17LTC2-CT 5m | 17 | 5 | 85 | 230V |
| 17LTC2-CT 6m | 17 | 6 | 102 | 230V |
| 17LTC2-CT 7m | 17 | 7 | 119 | 230V |
| 17LTC2-CT 8m | 17 | 8 | 136 | 230V |
| 17LTC2-CT 10m | 17 | 10 | 170 | 230V |
| 17LTC2-CT 12m | 17 | 12 | 204 | 230V |
| 17LTC2-CT 14m | 17 | 14 | 238 | 230V |
| 17LTC2-CT 16m | 17 | 16 | 272 | 230V |
| 17LTC2-CT 18m | 17 | 18 | 306 | 230V |
| 17LTC2-CT 19m | 17 | 19 | 323 | 230V |
| 17LTC2-CT 20m | 17 | 20 | 340 | 230V |
| 17LTC2-CT 22m | 17 | 22 | 374 | 230V |
| 17LTC2-CT 25m | 17 | 25 | 425 | 230V |










