Self-regulating Electric Trace Heating Cable #HTC
Icoheat HTC self-regulating tracing heating cables are mainly used for freeze protection application need steam cleaning and process temperature maintenance up to 120 °C. Its fluoropolymer outer shell (-CF) provides high chemical resistance against aggressive organics and corrosives.
- Max exposure temp 200°C
- Wattage 10W 17W 26W 33W 40W 50W 65W
- Voltage 110-120V,208-277V
- Dimension: 11.2×5.2mm (CF)
- Approvals: CE UKCA EAC
- Main application: Freeze protection, Process temperature maintenance
- General
- Specification
HTC Self Regulating Heating Cables
HTC Self Regulating Heating Cables is constructed of matrix made of a semiconductor PTC(Positive temperature coefficient) material extruded even between two parallel copper bus wires. It produces heat from the flow of current through PTC material which convert electrical energy into heat as it is resistance heating element. A self-regulating cable automatically varies its output power according to ambient temperature change. It increases its heat output while the ambient temperature is decreasing. Relatively, it reduces its heat output while the ambient temperature is increasing.
Benefits:
- Safe,Multiple overlap is allowed and no overheat accumulation when overlap
- Energy-saving,automatically adjust its output power in response to surrounding temperature
- Easy instalation,can be cut to length arbitrarily on site within the specified length range
- Reliable,low installed & maintenance cost
- Clear,no pollution for environment.
| Max exposure temp (power on): | 120°C |
| Max exposure temp (power off): | 200°C |
| Temperature classification: | T4 |
| Minimum installation temperature: | -40°C |
| Output power: | 10,17,26,33,40,50,65W/m |
| Work Voltage: | 110-120V,208-277V |
| Tinned copper braid resistance: | Max 0.018Ω/m |
| Min bend radius: | 13mm @20°C / 35mm @-40°C |
| Outer jacket: | CF (fluoropolymer outer jacket) |
You May Also Like
